Visit Us at WADe Asia NSIC Ground New Delhi 11-12 Oct-2019

Flush Doors

Amul Flush Doors are made of kiln seasoned imported Maranti hardwood with GURJAN core and face. They are made out of high quality wood to make them exceptionally durable and dimensionally stable with excellent tooling and finishing properties. They are then bonded with special quality Phenol formaldehyde synthetic resin as per the guidelinesof IS:2202 in different thickness & ordered sizes.

Laminated Flush Doors

Sensing the taste of professional architects for modern housing as well as commercial projects, the company has succesfully introduced a range of LAMINATED FLUSH DOORS. Decorative laminate of different designs are being MACHINE PASTED on flush doors applying a very special type of adhesive.

The Salient Features of this product are as under:

  • Gurjan Face.
  • Gurjan or equivalent 2.5mm H/W core.
  • Pine Frame
  • Meranti H/W filler
  • Also available in pine filler.
  • Normally available thicknesses 30mm, 32mm, 35mm, 40mm
  • Why the cost of Amul Door are little higher than local doors:
    • IS:2202 permits only PF Resin in Doors, we are honestly doing so
    • No joint frame, we are giving only full frames.
    • Fully Seasoned Frame and filler

Fire Retardant Ply and door

Fire Retardant is a non-leachable plywood. It is not just Fire-Retardant but it also resists fungi, insects and more importantly pin-hole borers. Selected hardwood panels and wooden planks undergo vacuum-pressure-impregnation (as per IS:5509 specification) that results in a special chemical composition which helps in forming a protective char, in the unfortunate event of a fire. Plywood is an organic material; it cannot be absolutely fire proof. However, Fire Retardant resists immediate ignition or burning, surface spread of flames and flame penetration.

Amul Fire Retardant Ply & Door are available in thickness ranges from 4mm to 35mm with standard size sheet such as 8' x 4'/

It is our special product having Fire Retardant properties. The USP of this product are as under:

  • All Gurjan or equiv. H/W core
  • All layers treated in Mono Ammonia Phosphate for 72 hours.
  • Before and after two stage treatment
  • Rating- As per available rating our 12mm FR Ply is rated for 73 minutes as against BIS requirement of 30 minutes.

There are 3 major tests for FRP-

  • Flammability test
  • Flame Penetration test
  • Rate of Burning test

We proudly announce that Amul is the first Company in Gandhidham to have this license.